How to install the steam separator of water ring vacuum pump


The water ring vacuum pump is a kind of coarse vacuum pump, which needs to be used with the water separator. When installing the steam separator, we must master the correct installation method. The installation method of the device's steam separator will be described below.
I. pipeline installation of water ring vacuum pump and water separator
1. If external exhaust is required during vacuumization, the exhaust port of the separator can be piped to the outside. If a gas line is not provided, the gas will be discharged directly into the atmosphere through the vents on the separator.
2. The pump exhaust pipe shall be connected to the inlet of the steam separator. When used as a compressor, the steam separator exhaust pipe should be connected to the compressed air system for use.
3. The valve shall be installed on the inlet pipe of the pump for control to prevent the working fluid in the pump from flowing back into the system due to the vacuum suction of the system when stopping.
4. When used as a compressor, if pressure exists on the pipe pipe, the valve shall also be installed on the pipe pipe of the steam separator.
Second, adjust the structure
1. The vacuum pump adjusts the vacuum degree and air volume through the valve installed on the inlet air pipe and inlet air pipe. Therefore, when operating as a compressor, a valve mounted on the outlet pipe can be used to regulate the pressure of the compressor unit.
2. When compressed gas is not allowed to be discharged due to its service conditions, a ductpipe should be installed between the inlet and outlet trachea with the diameter of the catheter the same as the diameter of the valve to adjust the gas volume and pressure within the limit.
Three, the installation of the steam separator
1. The steam separator is installed on the basis according to the outline diagram.
2. If the installation position needs to be changed, the connection pipeline of the separator should not be too long and the turn should not be too steep, otherwise the flow loss of water and gas in the pipeline will increase, thus increasing the pressure at the pump exhaust end, thus reducing the gas volume and vacuum, and increasing the power consumption.
The water ring vacuum pump will pump air with the help of the soda separator, so the soda separator is not required. Therefore, we should learn how to install the method. If it's too much trouble, we can also invite a specialist to install it.


Liquid Ring Vacuum Pump complete with motor
Vacuum pump to remove hydrocarbons and organosilicon
Vacuum pump group modification scheme - water ring vacuum pump
Screw vacuum pump and liquid ring vacuum pump comparison between

评论

发表评论

此博客中的热门博文

Reasons and Solutions for Fragile Belt of Roots Blower

图片
1. Reasons for easily broken belt of Roots blower: 1. First of all, consider the high speed and high temperature of Roots blower. 2. The distance between the head and motor of Roots blower is too large and the belt is tight. 3. The belt does not match the V groove of the pulley, so it can not withstand the load fracture after wearing. 4. Active pulley and driven pulley are not parallel, resulting in serious friction between belt and groove on one side, and can not bear load fracture after wear. 5. Heavy load, long-term overload operation of belt is easy to break. 6. Roots fan nose and motor pulley are not concentric, different axes. 7. Belt quality problems. 2. Measures to prevent the belt of Roots blower from breaking. 1. Roots blower must start without load before running. After starting, it should be loaded. After running, it can generally avoid triangular belt breaking. 2. The pulley between the motor and the fan should be parallel, which is a key point. If not para
阅读全文