Water ring vacuum pump for carbon - hydrogen cleaning machine


Water ring vacuum pump in the carbon - hydrogen cleaning machine in the field case
The principle of vacuum cleaning: there are many residual gases in the detergent, containing 8-10 times more gas than water, and the high-frequency wave emitted by the ultrasonic vibrator will attenuate when it encounters gas (residual oxygen), so vacuum degassing is required.
First wash basket into liquid trough, shut off the wash tank, vacuum degassing system startup, will exhaust the air groove, under vacuum condition can will need to wash the product of the gas inside the narrow gap and containing gas extraction in the detergent, ultrasonic launch, swing assembly starts, turns washing basket, make the liquid detergent can fully; After the set time, the vacuum is released, the cylinder head is opened, and the washing basket enters the next slot.
Water ring roots combined vacuum pump, dedicated to hydrocarbon ultrasonic cleaning equipment.
Imported water ring roots vacuum pump features:
Especially suitable for water, vapor, condensable gas, particle solid vacuum extraction.
Most of the compression heat is absorbed by the sealing liquid, which tends to be isothermal compression. Therefore, the outlet exhaust temperature is low and the safety of extracting explosive gas is high.
No metal friction surface, no lubricating oil inside, no oil and gas pollution, low maintenance cost.
Vacuum pumps

Vacuum Pump: Final Buyer's Guide [New Products 2019] 

评论

发表评论

此博客中的热门博文

Reasons and Solutions for Fragile Belt of Roots Blower

图片
1. Reasons for easily broken belt of Roots blower: 1. First of all, consider the high speed and high temperature of Roots blower. 2. The distance between the head and motor of Roots blower is too large and the belt is tight. 3. The belt does not match the V groove of the pulley, so it can not withstand the load fracture after wearing. 4. Active pulley and driven pulley are not parallel, resulting in serious friction between belt and groove on one side, and can not bear load fracture after wear. 5. Heavy load, long-term overload operation of belt is easy to break. 6. Roots fan nose and motor pulley are not concentric, different axes. 7. Belt quality problems. 2. Measures to prevent the belt of Roots blower from breaking. 1. Roots blower must start without load before running. After starting, it should be loaded. After running, it can generally avoid triangular belt breaking. 2. The pulley between the motor and the fan should be parallel, which is a key point. If not para
阅读全文