Model Daquan of Water Ring Vacuum Pump


If we want to use water ring vacuum pump skillfully, we need to have a detailed understanding of its model, use, performance and so on. Today I'm going to introduce you to the model. In order to meet different industrial needs, the equipment has a variety of models to choose from. The manufacturer of water ring vacuum pump has introduced its common models in detail for us.
Type 1.2BA: This kind of water ring vacuum pump is mostly used to extract gas and water vapor. The suction pressure can reach 33 mbar absolute pressure. When the suction pressure of the vacuum pump is close to the limit vacuum for a long time, the cavitation protection pipe should be connected to protect the pump and eliminate the cavitation sound.
Type 2.2BE: Usually used for suction of gases without solid particles, insoluble in water and non-corrosive, in order to form vacuum and pressure in sealed containers.
SK type: This type of pump and compressor is used to suck or press air and other non-corrosive, insoluble in water and non-solid particles of gas, in order to form vacuum and pressure in sealed containers to meet the process requirements.
4. SK type direct pump: including SK-0.4, SK-0.8, SK-1.0, SK-1.5B four specifications, is used to suck air and other non-corrosive, insoluble in water, does not contain solid particles of gas, in order to form a vacuum in the closed container.
5.2SK type: equivalent to two SK series water ring vacuum pumps in series.
The types of water ring pumps are different, and their application fields are also different. We should choose a suitable type of water ring vacuum pump according to our actual use conditions.
Liquid Ring Pump
Vacuum Pump For Vacuum Vulcanization
Liquid Ring Vacuum Pump

Rotary Vane Vacuum Pump

评论

发表评论

此博客中的热门博文

Reasons and Solutions for Fragile Belt of Roots Blower

图片
1. Reasons for easily broken belt of Roots blower: 1. First of all, consider the high speed and high temperature of Roots blower. 2. The distance between the head and motor of Roots blower is too large and the belt is tight. 3. The belt does not match the V groove of the pulley, so it can not withstand the load fracture after wearing. 4. Active pulley and driven pulley are not parallel, resulting in serious friction between belt and groove on one side, and can not bear load fracture after wear. 5. Heavy load, long-term overload operation of belt is easy to break. 6. Roots fan nose and motor pulley are not concentric, different axes. 7. Belt quality problems. 2. Measures to prevent the belt of Roots blower from breaking. 1. Roots blower must start without load before running. After starting, it should be loaded. After running, it can generally avoid triangular belt breaking. 2. The pulley between the motor and the fan should be parallel, which is a key point. If not para
阅读全文