How to Maintain Vacuum Furnace


Vacuum Furnace Manufacturer: How to Maintain Vacuum Furnace
Nowadays, many industries will use vacuum furnaces in the products of vacuum furnaces manufacturers. How to maintain them when using vacuum furnaces? Below the high temperature vacuum furnace small braiding you to learn about it.
1. For valves and other accessories, installation instructions should be maintained. High temperature vacuum furnace.
2. If maintenance is to be carried out, the vacuum furnace will be cut off to ensure the safety of operators.
3. Clean the appearance of the vacuum furnace equipment of the vacuum furnace manufacturer and keep it clean.
4. Check circulation water flow. If there is no flow, add water pipes and so on.
5. Dust exists in the vacuum furnace equipment of the vacuum furnace manufacturer, which should be rubbed with alcohol.
6. Regular refueling of transmission parts of vacuum furnace. High temperature vacuum furnace.
7. When disassembling and assembling sealed parts, it is necessary to clean them with alcohol before installing them.
High Temperature Vacuum Furnace
Widespreadness of Vacuum Oil Quenching Furnace
For vacuum gas quenching furnace, it is more suitable for processing small pieces of materials with high hardenability and high hardenability. Vacuum oil quenching furnace is more widely used than the former, because the maximum cooling rate of high pressure gas is much lower than that of quenching oil, but the operation and maintenance of gas quenching furnace are simpler than that of the latter. In short, the choice of vacuum oil quenching furnace is mainly based on the heat treatment performance of the product, so that users can choose the appropriate vacuum oil quenching furnace. High temperature vacuum furnace.
Technology and Key Points of Heat Treatment Vacuum Furnace
Heat treatment vacuum furnace is a new type of heat treatment technology combining vacuum technology with heat treatment technology. The vacuum environment of heat treatment vacuum furnace is a lower atmosphere than atmospheric pressure, including low vacuum, medium vacuum, high vacuum and ultra-high vacuum. In fact, heat treatment vacuum furnace process is also atmosphere controlled heat treatment. Heat treatment vacuum furnace mainly refers to part or all of the heat treatment vacuum furnace process in vacuum state. It can realize almost all the heat treatment processes involved in conventional heat treatment. Compared with conventional heat treatment, heat treatment vacuum furnace can work without decarbonization, oxidation and carburization, remove scales on the surface of the treated workpiece, and also has the function of degreasing and degassing, which can make the surface of the workpiece more bright and clean.
Tool Steel Vacuum Tempering Furnace
Metal Heating Vacuum Sintering Furnace
Carburizing Of Steel
Refractory Furnace Structure

评论

发表评论

此博客中的热门博文

Reasons for Axis Breakage of Water Ring Vacuum Pump and Corresponding Measures

图片
Axis Breakage of Water Ring Vacuum Pump: After 2 years of use, water ring vacuum pump will present the phenomenon of excessive noise, excessive starting current, remarkable decrease in pumping capacity and vacuum degree. It is found that the scale inside the pump body is severe after the technical staff of our company disassembled and inspected. The reason for scaling is that the water contains calcium, magnesium and other carbonate substances. When the pump is heated and heated, its solubility decreases, and molecule-bound deposits form scales. What measures should be adopted to avoid axle breakage? Water ring vacuum pump Through the analysis of the causes of shaft breakage of water ring pump, the following corresponding measures are adopted. 1. Revamping the original process equipment to reduce the content of impurities in acetylene gas trap: At the same time, the large well water of water ring vacuum pump is changed into circulating water to reduce the hardness of wat
阅读全文