What kind of high temperature furnace is safe and reliable

High temperature furnace, as the name suggests is a very high temperature electric furnace, the highest can reach more than 1800 degrees, so a friend will ask, so high temperature electric furnace, operation will not accidentally encounter furnace shell burns? Because the operation will inevitably touch. So small make up tell you: will never be scalded. Taking the high temperature furnace products of our company as an example, our high temperature furnace has the following three safety requirements:
1, the use of three layers of insulation, respectively: aluminum silicate fiberboard, aluminum oxide fiberboard, aluminum oxide (polycrystalline) fiberboard, not only good insulation effect, and energy saving effect is more than 80% of the old electric furnace. And long-term use of furnace, shell temperature is less than 45 degrees, the temperature will not produce burns to the human body.
2. The closed-loop technology thyristor module is adopted for trigger control, and the phase-shifting trigger control mode is adopted. The output voltage, current or power can be continuously adjustable, with the characteristics of constant voltage, current or power; The current ring is the inner ring and the voltage ring is the outer ring. When the load is suddenly added or the load current exceeds the current limit value, limit the output current of the voltage regulator in the rated current range to ensure the normal operation of the output and voltage regulator; At the same time, the voltage loop is also involved in regulation, so that the output current of the voltage regulator is limited to the rated current range, and the output current and voltage are maintained constant under the premise of sufficient regulation allowance. So as to protect the heating element from the impact of excessive current and voltage and achieve safe and reliable control effect and control accuracy.
3. Integrated module control unit is adopted to ensure accurate control accuracy. Double loop control and double loop protection are designed, which are equipped with overshoot, overshoot, undershoot, segment couple, phase missing, overvoltage, overcurrent, overtemperature, current feedback, soft start and other protection.
Through the above three protection measures, can ensure that the staff in the operation of the high temperature furnace will not be burns or other accidents. In addition, our company will provide post safety operation training for customers to ensure that operators can operate safely and correctly. Avoid accidents.
Термическая обработка отжига
Конструкция печи промышленной печи
Печь отжига кварцевого стекла
Колпачковая печь для отпуска
Печь для закалки в солевой ванне