Vacuum Pressure Sintering Furnace


In vacuum pressure sintering furnace, sinter is subjected to both high temperature and mechanical pressure and vacuum. It can be used to sinter products with density second only to that of casting products. Generally, powder materials are filled into graphite moulds under 700-1500MN/m3 mechanical pressure and heated to 2500 C in vacuum. The mould can be heated directly by electric current or indirectly by induction.
Vacuum pressure sintering furnace is mainly used to sinter dense billets which are easy to react with high temperature gas, such as oxides, carbides, borides, etc. After sintering, the density can reach a high density, which is more than 95% of the theoretical value, and has high purity. Graphite resistors and graphite moulds lose very little weight in vacuum operation. Vacuum hot pressing sintering is to control the quality of sintered body by using many parameters such as high pressure, temperature and time in compaction process.
Powder Material Technology Furnace
Continuous Annealing Furnace For Stainless Steel Tubes And Wires
Zinc-Aluminum-Copper-Brass Alloy Annealing Furnace
Laser Diamond Bit Graphite Sintering Mold

评论

发表评论

此博客中的热门博文

Reasons and Solutions for Fragile Belt of Roots Blower

图片
1. Reasons for easily broken belt of Roots blower: 1. First of all, consider the high speed and high temperature of Roots blower. 2. The distance between the head and motor of Roots blower is too large and the belt is tight. 3. The belt does not match the V groove of the pulley, so it can not withstand the load fracture after wearing. 4. Active pulley and driven pulley are not parallel, resulting in serious friction between belt and groove on one side, and can not bear load fracture after wear. 5. Heavy load, long-term overload operation of belt is easy to break. 6. Roots fan nose and motor pulley are not concentric, different axes. 7. Belt quality problems. 2. Measures to prevent the belt of Roots blower from breaking. 1. Roots blower must start without load before running. After starting, it should be loaded. After running, it can generally avoid triangular belt breaking. 2. The pulley between the motor and the fan should be parallel, which is a key point. If not para
阅读全文