Vacuum furnace and vacuum thermos cup


Stainless steel vacuum cup has made great progress in China since the reform and development, especially in the past decade. Our company has developed more than 50 series of vacuum cups and pots, hundreds of varieties, is still in constant development, production, variety with each passing day.
Vacuum cups are simply divided into tailless vacuum cups (or holistic vacuum cups) with tailed vacuum cups according to their production methods. The tail vacuum cup is obtained by vacuum exhaust platform, similar to glass thermos bottle and large electronic tube. On the vacuum exhaust platform, vacuum cup is inserted (bottom of the vacuum cup is welded with exhaust copper pipe). When the vacuum is less than 2 *E23Pa, the copper pipe is cut and polished with hydraulic clamps, and then the following processes are carried out: painting, gluing, electrolysis, polishing, pressing and packing.
The tailless vacuum cup is formed in a vacuum brazing furnace by vacuum pumping, vacuum brazing, then cooling out, electrolysis, polishing, packaging and other processes (see Figure 2).
The length of holding time of vacuum cup depends on the structure of the cup and the thickness of the material.
The vacuum cup with large capacity and small caliber has a longer holding time, while the vacuum cup with large caliber has a shorter holding time.
The longer the material is, the longer the holding time is, but the cup body is easily damaged and deformed, which affects the service life.
3. The outer layer of metal film and copper plating inside the vacuum cup can also increase the degree of thermal insulation.
The service life of the vacuum cup also depends on the cleaning of the inner layer of the cup and the time of evacuation. The most important thing is the structure of the vacuum furnace. Nowadays, there are four kinds of vacuum equipments used in society, i.e. vacuum exhaust table and vacuum brazing furnace. The two category is the tail vacuum exhaust desk; another type of brazing furnace. The brazing furnace type is divided into single chamber, multi chamber, increasing pumping speed and multi chamber.
Related products:

HEAT+TREATMENT+FURNACES

评论

发表评论

此博客中的热门博文

Reasons for Axis Breakage of Water Ring Vacuum Pump and Corresponding Measures

图片
Axis Breakage of Water Ring Vacuum Pump: After 2 years of use, water ring vacuum pump will present the phenomenon of excessive noise, excessive starting current, remarkable decrease in pumping capacity and vacuum degree. It is found that the scale inside the pump body is severe after the technical staff of our company disassembled and inspected. The reason for scaling is that the water contains calcium, magnesium and other carbonate substances. When the pump is heated and heated, its solubility decreases, and molecule-bound deposits form scales. What measures should be adopted to avoid axle breakage? Water ring vacuum pump Through the analysis of the causes of shaft breakage of water ring pump, the following corresponding measures are adopted. 1. Revamping the original process equipment to reduce the content of impurities in acetylene gas trap: At the same time, the large well water of water ring vacuum pump is changed into circulating water to reduce the hardness of wat
阅读全文