Three main characteristics of vacuum furnace


The principle of the vacuum furnace is to use the vacuum system to discharge some of the material inside the furnace chamber, so that the internal pressure is lower than a standard atmospheric pressure, so that there is a vacuum transition in the furnace. The earliest record of vacuum furnace is the 1930s, 1927 made in the United States electrical materials vacuum annealing furnace. In 1953, vacuum consumable electric arc furnace has been used in smelting titanium sponge in industry. Before and after 50s, vacuum furnaces were widely used in industry. In 1960, the United States developed an oil quenching vacuum furnace.
The main characteristics of vacuum furnace are:
1, the pressure inside the furnace can be drawn into industrial furnace below atmospheric pressure.
2. Electric heating in vacuum furnace, the surface of the heated workpiece is not oxidized, not decarbonized, small deformation, good mechanical properties.
3. Smelting metal with vacuum furnace is beneficial to remove impurities, fewer pinholes, smaller segregation and better quality.
The scope of application of vacuum furnace is:
Vacuum furnace is suitable for smelting and heating high quality, high purity, refractory metals, such as tungsten, molybdenum, tantalum, niobium, titanium, heat-resistant alloy steel smelting and magnetic materials, electrical materials, high strength steel, stainless steel, tool steel, die steel and other heat treatment.
The structure of vacuum furnace:
Vacuum furnace is generally composed of furnace, electric heating device, sealed furnace shell, vacuum system, power supply system and temperature control system. The sealed shell is welded with carbon steel or stainless steel, and the joint surface of the detachable part is sealed by vacuum sealing material. In order to prevent the deformation of the shell after heating and the deterioration of the sealing material, the furnace shell is usually cooled by water cooling or air cooling. The furnace is located in the sealed furnace shell. According to the use of the furnace, the furnace is equipped with different types of heating elements, such as resistors, electrodes and electron guns. The vacuum furnace for smelting metals is equipped with a crucible, and some are equipped with automatic pouring devices and manipulators for loading and unloading materials. The vacuum system is mainly composed of vacuum pump, vacuum valve and vacuum gauge.

Related products
HOT PRESSING FURNACE MANUFACTURING
QUENCHING OPERATION PROCESS OF STEEL
High vacuum tempering furnace

Vertical bottom charging vacuum annealing furnace

评论

发表评论

此博客中的热门博文

Reasons and Solutions for Fragile Belt of Roots Blower

图片
1. Reasons for easily broken belt of Roots blower: 1. First of all, consider the high speed and high temperature of Roots blower. 2. The distance between the head and motor of Roots blower is too large and the belt is tight. 3. The belt does not match the V groove of the pulley, so it can not withstand the load fracture after wearing. 4. Active pulley and driven pulley are not parallel, resulting in serious friction between belt and groove on one side, and can not bear load fracture after wear. 5. Heavy load, long-term overload operation of belt is easy to break. 6. Roots fan nose and motor pulley are not concentric, different axes. 7. Belt quality problems. 2. Measures to prevent the belt of Roots blower from breaking. 1. Roots blower must start without load before running. After starting, it should be loaded. After running, it can generally avoid triangular belt breaking. 2. The pulley between the motor and the fan should be parallel, which is a key point. If not para
阅读全文